Reloading

Rotary - Case Tumbler, 110 Volt

Rotary - Case Tumbler, 110 Volt

by Hornady

$163.36

Manufacture ID: 050220

Clean and polish brass cartridge cases to a brilliant shine with the rotary action of the Hornady Rotary Brass tumbler, coupled with its steel pin tumbling media. Six-liter drum holds 5 pounds of brass cases. Set tumbler to run for up to eight hours in half-hour increments using digital timer.

Specifications:

- Media Capacity: 5 Pounds
- Drum/Bowl Capacity: 5 Pounds
Brass Boss Case Prep Center, 110 Volt
Manufacture ID: 90390

Getting brass ready to reload used to be a long, arduous process. No more. The RCBS Brass Boss features six variable speed, rotating stations that completely prepare trimmed brass for reloading, all in one stop. The Brass Boss includes tools for all six stations: an inside VLD chamfering tool, outside deburring tool, primer pocket cleaner (small/large), military crimp remover (small/large), primer pocket uniformer (small/large), case neck brushes (four diameters) and a tub of dry case neck lubricant. Save time, elbow grease and process brass efficiently with Brass Boss.

Features:

- Six variable, high-speed rotating stations (four at <350 rpm; two at <550 rpm)
- Two fixed stations for case neck brushes
- Tools included for all stations
- Storage area for tools not in use
- 120-240 VAC for operation in multiple countries
- US, UK, EU and Australian power cords
Manufacture ID: 32906

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

Specifications:

- Caliber: 6.5 Creedmoor
- Number of Dies: 2
- Die Typ: Full Length Sizing, Bullet Seating
- Threads: 7/8"-14
- ShellHolder Included: No
- Storage Box Included: Yes
Manufacture ID: 32949

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

Specifications:

- Caliber: 6.5 Creedmoor
- Material: Steel
- Type: 2 Die
- Accessories: Plastic Storage Case
Progressive Press - Pro Chucker 5
Manufacture ID: 88910

RCBS Pro Chucker 5 Progressive Press

The RCBS Pro Chucker 5 Progressive Press was developed to be the perfect approach to saving income by reloading your own spent bullet cartridge casings. Produced implementing exceptionally robust materials, these Reloading Presses and Press Accessories through the experienced bullet case reloaders at RCBS will provide you with numerous years of dependable serivce. RCBS has elevated the bullet reloading market for many years, and the RCBS Pro Chucker 5 Progressive Press is evidence of their resolve for helping you make reloading a fun and easy procedure.
Manufacture ID: 32934

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

Specifications:

- Caliber: 6.5 Creedmoor
- Number of Dies: 2
- Die Type: Full Length Sizing, Bullet Seating
- Threads: 7/8"-14
- ShellHolder Included: No
- Storage Box Included: Yes
Manufacture ID: 30647

These revolutionary bullets from Barnes are made of 100% copper and contain no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight, making them a superb choice for hunting. Barnes recommends initially seating bullets 0.050" off the lands. Best accuracy will be found from 0.030" to 0.070" depending on the rifle.

Specifications:

- Caliber: 470 Nitro Express
- Bullet Diameter: 0.474
- Bullet Weight: 500 Grains
- Bullet Style: Hollow Point Flat Base Lead-Free
- Bullet Coating: Non-Coated
- Quantity: Per 20

Ballistics Information:

- Sectional Density: 0.318
- Ballistic Coefficient: 0.363

Note: These are component bullets, not loaded ammunition

Warranty: 100% Replacement guarantee from defects
2 Die Rifle Set - 6.5 Creedmoor
Manufacture ID: 7452362

Best choice for reloading jacketed bullets in bottlenecked rifle cases

Set consists of a full length resizing die with decapping stem and neck expanding button and a bullet seating die. These die sets are the reloader's best choice for loading jacketed bullets in bottlenecked rifle cases. For those who load cast bullets, we suggest the addition of a neck expanding die.

Specifications:

- Caliber: 6.5 Creedmor
Manufacture ID: 22831

Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.

Features:

- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Extremely low drag bullet profile delivers high ballistic coefficients
- Swagged lead core provided uniformity and balance
- AMP jacket design for optimum concentricity and accuracy

Specifications:

- Caliber: .22 Caliber (0.224" Diameter)
- Bullet Weight: 80 Grains
- Bullet Style: Polymer Tip Boat Tail (BT)
- Lead Free: No
- Cannelure: No
- Bullet Coating: Non-Coated
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.485
- Sectional Density: 0.228

Note: These are component bullets, not loaded ammunition
Manufacture ID: 263355

Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.

Features:

- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Extremely low drag bullet profile delivers high ballistic coefficients
- Swagged lead core provided uniformity and balance
- AMP jacket design for optimum concentricity and accuracy

Specifications:

- Caliber: 6.5mm/.264 Caliber (0.264" Diameter)
- Bullet Weight: 140 Grains
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Lead Free: No
- Cannelure: No
Bullet Coating: Non-Coated
- Quantity: Per 500

Ballistic Information:

- Ballistic Coefficient: 0.58
- Sectional Density: 0.287

Note: These are component bullets, not loaded ammunition
Manufacture ID: 1986

Speer TNT gives you what you want most-superior on-game performance. Starting with TNT's thin precision jacket, we add internal fluting and a dead-soft lead core to ensure complete bullet disruption. They finish the forming with a long ogive and a small hollow point. This gives us the ballistic coefficients needed for long shots. In fact, TNT's coefficients rival those of similar boat tail bullets. In a little over ten years, TNT has become one of our best sellers. Why? Great accuracy and impressive terminal performance.

Specifications:

- Caliber: .30 Caliber
- Bullet Diameter: (.308" Diameter)
- Bullet Weight: 125 Grains
- Bullet Type: Hollow Point (HP)
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.341
- Sectional Density: 0.188
- Diameter, Inches: .308"
- Diameter, mm: 7.823mm

Note: These are component bullets, not loaded ammunition

Warranty: Warranted against manufacturers defects.
Manufacture ID: 7690108

Lyman’s MSR Die Sets are engineered specifically for MSR ammo and are a must for anyone reloading for a modern sporting rifle. These sets include a Small Base Sizing Die designed for semi-auto use which will size cases to a slightly smaller diameter to ensure smooth chambering. Each die set comes with a separate Seating Die and Taper Crimp Die. The Taper Crimp Die is designed to give you added bullet grip for functioning through semi-auto actions. Straight walled cases come with Lyman's famous “M” Neck Expanding Die. The two step design of the expander plugs allow case mouths to be expanded just enough to smoothly seat a bullet without over working your brass. MSR Die Sets also come with one Lyman Ammo Checker gauge. These are “Go” gauges machined to minimum chamber specs. Simply drop your loaded round into the gauge, and if it fits, it will chamber. Naturally dies for “black rifles” should also be black, so MSR dies come with a black oxide finish and are packed in a foam lined storage case.

Features:

- Small Base Size die for smooth chambering
- Separate Taper Crimp die for tight bullet grip
- Ammo Checker cartridge “Go” gauge included with each set
- Packed in a sturdy, clear cover storage case
- Black finish matches your favorite “black” rifle

Specifications:

- Cartridge: 450 Bushmaster
- Number of Dies: 4
- Die Type: Sizer, Neck Expander, Seater, Taper Crimp
- Threads: 7/8"-14
- ShellHolder Included: Yes
- Storage Box Included: Yes
Lube Die - #2

Lube Die - #2

by RCBS

$38.99

Manufacture ID: 87552

Decap and lube cases in one step with our exclusive lube die. Designed for progressive presses like the Pro2000, Turret, AmmoMaster, Piggyback II and Auto 4x4, but works just fine in single-stage presses. Four sizes cover 45 popular calibers. It's faster and cleaner than a lube pad easy to refill with lubricant (RCBS Case Lube-2 included) standard 7/8" x 14 thread.

#2
22-250 Varminter
240 Weatherby Magnum
243 Winchester
6mm Remington (244 Remington)
25-06
250 Savage (250-3000 Savage)
257 Roberts
257 Roberts Improved 40 degrees
260 Remington
6.5mm-06
6.5 x 55mm Swedish Mauser
6.5 x 57mm Mauser
270 Winchester
280 Remington (7mm Exp. Rem.)
7mm Bench Rest Remington
8mm-08 Remington
7 x 57mm Mauser (7mm Mauser)
7 x 64mm Brenneke
7 x65mm Rimmed
30-06 Springfield
300 Savage
307 Winchester
7.5 x 54mm French MAS
7.65 x 53mm Belgian Mauser
7.7 x 58mm Japanese Arisaka
8mm-06
8 x 57mm Mauser (8mm Mauser)
338-06
35 Whelen
356 Winchester
358 Winchester
9.3 x 62mm Mauser
400CorBon
45 Automatic (45 ACP)

Warranty: If any of your RCBS equipment breaks or doesn't work, they will fix it or replace it. No time limit. No questions asked.
"E-ZEE Prime" Hand Priming Tool
Manufacture ID: 7777810

The system works with any popular brand of standard shellholder and allows instant changeover between primer sizes. Includes two primer trays, each of which incorporate their own built-in large or small primer punch assembly. There are no small parts to fuss with or lose. Each tray has a built-in shut-off gate to keep primers in place during change-over. The reloader simply removes the snap-in-place lock collar and installs the correct size primer tray and the shellholder as needed. Then, the lock collar is snapped in place and the change-over is complete. The primer trays also function as a primer flipper to properly orient primers for seating. The comfortable ergonomic design optimizes leverage to reduce hand fatigue.

Features:

- Ergonomic shape reduces fatigue
- Accepts standard shellholders
- Plenty of leverage, yet provides needed "feel" for precision primer seating
- Integral primer tray & primer punch assembly - no parts to lose
- Includes large & small primer tray/parts assemblies
- Primer tray has a built-in shut-off gate to prevent spilling primers
- Primer tray doubles as a primer flipper to orient primers
Manufacture ID: 58734

Nosler AccuBond Long Range Bullets were specifically developed for the increasing popularity of long range hunting. Nosler's unique manufacturing techniques allow them to produce a rapidly expanding bonded hunting bullet with the highest Ballistic Coefficient possible in a bullet of the same caliber and weight. The bonding process eliminates the issue of being too close, a problem often associated with many of the other high B.C.hunting bullets. AccuBond Long Range Bullets' long, sleek ogive was designed to produce outstanding accuracy in a wide variety of firearms without the necessity to be loaded close to or in contact with the lands.

Specifications:

- Caliber: 7mm
- Bullet Diameter: 0.284"
- Bullet Weight: 150 Grains
- Bullet Length: 1.380"
- Bullet Style: Spitzer Point
- Bullet Coating: Non-coated
- Quantity: 100 Bullets

Ballistics Information:

- Sectional Density: 0.266
- Ballistic Coefficient: 0.611
- Optimal Velocity Range: 1300 fps minimum-unlimited

Note: These are component bullets, not loaded ammunition
Manufacture ID: 2285

Perfect for those long range shots, the Speer Hot-Cor Spitzer has a higher ballistic coefficient and are designed to retain velocity over distance. This pattern, coupled with the Hot-Cor process which virtually ensure the elimination of core slippage, provide a bullet that offers deep penetration and excellent expansion, regardless of the range.

Specifications:

- Caliber: 8mm Caliber
- Bullet Diameter: (.323" Diameter)
- Bullet Weight: 200 Grains
- Bullet Type: Spitzer Soft Point (SP),
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.411
- Sectional Density: 0.274
- Diameter, Inches: .323"
- Diameter, mm: 8.204mm

Note: These are component bullets, not loaded ammunition

Warranty: Warranted against manufacturers defects.
Manufacture ID: 2022

Speer offers a variety of5 reloading bullets ideal for hunters, plinkers and varminters. Speer Spitzer Boat Tail bullets feature a tapered heel that reduces aerodynamic drag for flatter trajectories and less wind drift. These bullets are great bullets to use hunting medium sized game.

Specifications:

- Caliber: .30 Caliber
- Bullet Diameter: (.308" Diameter)
- Bullet Weight: 150 Grains
- Bullet Type: Spitzer Boat Tail (BT)
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.423
- Sectional Density: 0.226
- Diameter, Inches: .308"
- Diameter,mm: 7.823mm

Note: These are component bullets, not loaded ammunition

Warranty: Warranted against manufacturers defects.
Lock-Out Die

Lock-Out Die

by RCBS

$54.14

Manufacture ID: 87540

Detects a no powder or double charged case and will lock-up the press movement so you can fix the problem before proceeding. Works for straight wall pistol cases only. Comes with two bushings.

Specifications:

- Material: Steel
- Plastic storage case
- 2 Bushings
- This die comes assembled from RCBS with a spring loaded plunger.

How the Die Works:

- Once the die is set to check for the desired powder charge a plunger on the inside of the die lines up with a ball bearing at the same time the case mouth pushes up on a sleeve inside the die. The die locks up when the sleeve that is pushed up by the case mouth contacts the ball bearing.
- When the powder charge is correct a ball bearing inside the die will drop into a slot in the plunger allowing the sleeve the case mouth is pushing up on to move all the way into the lock-out die.
- When the powder charge is low or there is no charge in the case the ball bearing will not drop into the slot on the plunger causing the sleeve the case mouth is pushing up on to lock-out the press.
- When there is too much powder the charged case pushes the slot on the plunger past the ball bearing causing the sleeve the case mouth is pushing up on to lock up the press.
Manufacture ID: 2435

Speer Hot-Cor Flat Nose Bullets are designed for safe use in firearms with tubular magazines. These bullets also hold together better because the Hot-Cor process eliminates the lead oxide layer that's found between the core and jacket of conventional "cold core" bullets. This translates into a bullet that offers deeper penetration and greater expansion that is needed for taking larger game.

Specifications:

- Caliber: .35 Caliber
- Bullet Diameter: (.358" Diameter)
- Bullet Weight: 180 Grains
- Bullet Type: Soft Point Flat Nose (SPFN)
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.245
- Sectional Density: 0.204
- Diameter, Inches: .358"
- Diameter, mm: 9.093mm

Note: These are component bullets, not loaded ammunition

Warranty: Warranted against manufacturers defects.
Series A Full Length Die Set - 357 Sig
Manufacture ID: 23101

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge.

Type: 2 Die Set
Fits: 357 Sig

Warranty: If any of your RCBS equipment breaks or doesn't work, they will fix it or replace it. No time limit. No questions asked.
50 BMG Case Length-Headspace Gauge
Manufacture ID: 7832326

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: 50 BMG
- Weight: 8 oz.
Manufacture ID: 33201

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge.

Type: 2 Die Set
Fits: 240 Weatherby Magnum
Manufacture ID: 4397

Speer Gold Dot bullets were designed to meet stringent law enforcement standards for dependability and performance. They features Uni-Cor technology which firmly bonds the core to the jacket and virtually eliminates bullet failures. The hollow point is created after the jacket is built. This helps produce maximum expansion and weigh retention while improving bullet feeding. A great personal defense bullet.

Specifications:

- Caliber: .40 Smith & Wesson/10mm Auto
- Bullet Diameter: (.400" Diameter)
- Bullet Weight: 165 Grains
- Bullet Type: Gold Dot Hollow Point (GDHP)
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.138
- Sectional Density: 0.147
- Diameter, Inches: .400"
- Diameter, mm: 10.16mm

Note: These are component bullets, not loaded ammunition

Warranty: Warranted against manufacturers defects.